Utilizamos cookies propias y de terceros, para realizar el análisis de la navegación de los usuarios. Si continúas navegando, consideramos que aceptas su uso. Puedes cambiar la configuración u obtener más información aquí.
Síguenos en Clave en Facebook Clave en Twitter
91 401 63 07

Reference Digital Audio 40

Estás en:

CABLES - Cables Digitales

Reference Digital Audio 40

Reference Digital Audio 40

0,60 METROS : 110,00 €
1,00 METROS : 130,00 €
3,00 METROS : 170,00 €

The QED Reference Digital Audio 40, the new standard for digital coaxial S/PDIF signals.

The QED Reference Digital Audio 40 utilises a carefully engineered geometry to achieve the precise characteristic impedance required for the maximum transfer of S/PDIF signals.

Silver plated conductors deliver a low resistance path for high frequencies and QED "Digiloc" plugs closely match the cable impedance reducing return loss by up to 1dB when compared to conventional RCA plugs.

This ensures optimal signal transfer and improved micro-timing of the audio signal.

True 75 Ohm Cordage

Through the use of factory controlled geometry and low permittivity foamed polyethylene dielectrics, Reference Digital Audio 40 maintains the correct characteristic impedance to match the transmission line between digital source and sink precisely.

This makes for a very low jitter signal transfer which, listening tests have shown, leads to clearly audible sonic improvements.


Impedance matched Digiloc plugs Domestic S/PDIF interfaces use the traditional RCA phono connector which is not impedance matched to the 75 Ohm transmission line.

This causes measurable insertion loss and an increase in jitter due to signal reflections at the connector boundaries.

The all new Digiloc RCA plugs are more closely impedance matched than ever before and measurements have shown, reduce insertion loss by up to 1.2 dB compared to ordinary RCA plugs.

Triple Layer Electromagnetic Shielding

A dual layer closely woven 99.999% OFC shield braid and aluminium mylar wrap with 100% coverage comprise a triple layer electromagnetic shield coaxially spaced around the central signal carrier within a foamed polyethylene dielectric.

This ensures that interference signals induced by nearby high current noise sources do not contribute to higher signal jitter than would otherwise be the case.

By the same token the shielding prevents unwanted voltage induced interference escaping the cable which might affect nearby analogue signal carriers.

Just Listen

Silver plated signal carriers, effective high quality shielding and impedance matched cordage and plugs all combine to create audible sonic improvements when compared to the competition.

Low Jitter Jitter is the undesired deviation from true periodicity of an assumed periodic signal in electronics and telecommunications, often in relation to a reference clock source.

A cable displaying low jitter has been measured at typically 75p.s

The Reference Digital Audio 40 cable will connect from the following devices: CD player, Blu-Ray player and other S/PDIF device output to the following receivers: DAC, Digital Pre-Amp, AV Amplifier and other S/PDIF device input.


QED Reference Digtal Audio 40

Silver Plated 99.999% Oxygen Free Copper (SPOFC) central conductor with extruded foamed Polyethylene (PE) dielectric- for sonic purity and low return loss Double 99.999% OFC braid for 100% electromagnetic screening coverage

Twin leaf 24c Gold plated QED ‘Digiloc™’RCA plugs featuring high purity copper contacts, hollow centre pin and low eddy current design 75 ohm coaxial design with close match 75 ohm locking plug for reduced return loss

Carrito de la compra

contenido: 0 articulos
total: 0,00 €
condiciones de venta
Última novedad

c\ Padilla, 68 - 28006 Madrid
91 401 63 07